Care
61211-1270302
MMZ M
9-13
Filter replacement should take place every 2000 operating hours at the
latest. If one of the filter elements significantly changes color before ex-
piry of this interval, you should replace the filter elements. To order the
filter elements, please call our support team or contact a ZEISS service
engineer. Different filter elements are used in the filters.
Changing the filter
CAUTION
There is a risk of injury if the filter cap is removed under pres-
sure.
Shut off the pressure before starting work on the service unit.
Disconnect the compressed air supply from the power supply.
Make sure to depressurize the line.
1
Open the filter cap and remove it.
2
Clean the filter cap.
3
Replace the filter element.
4
Reattach the filter cap.
After replacing the filters, the compressed air can be switched on again.
Checking the oil level of the oil pump
The oil level in the oil pump must be checked once a week. The oil
pump is located on the left side of the controller cabinet.
Bearing damage due to insufficient lubrication.
Replacement of the bearings and other components.
ü
The oil reservoir must be filled up to the lower mark.
[3]
Fill in the specified oil into the filler hole until the upper mark is
reached
[1.2]
Содержание MMZ M
