10
07/05
•
Click on the
Multi Track
button in the
Configuration Control
window (Fig. 15).
•
Click on the
Descanned
button if necessary.
The following functions are available in the
List of
Tracks
panel (Fig. 15).
Modes
Switch tracks after each
Line
button
Tracks are switched during scanning line by line. The following settings
can be changed between tracks: Laser line and intensity and channels
incl. settings for gain and offset.
Switch tracks after each
Frame
button
Tracks are switched during scanning frame by frame. The following
settings can be changed between tracks: Laser line and intensity, all
filters and beam splitters, the channels incl. settings for gain and offset
and the pinhole position and diameter.
Frame Fast
button
The scanning procedure can be made faster. Only and the laser line and
intensity and the
Amplifier
Offset
are switched, but no other hardware
components. The tracks are all matched to the current track with regard
to emission filter, dichroic beam splitter, setting of Detector Gain,
pinhole position and diameter. When
Line
button is selected, the same
rules apply as for
Frame Fast
.
Settings
Add Track
button
An additional track is added to the configuration list. The maximum of
four tracks can used. One track each with basic configuration is added,
i.e.: one Ch 1 channel is activated, all laser lines are switched off,
emission filters and dichroic beam splitters are set in accordance with the
configuration last used.
Remove
button
The single track previously marked in the
List of Tracks
panel in the
Name column is deleted.
Store/Apply Single Track
button
Opens the
Track Configurations
window. A selected track defined in a
Channel Mode Configuration can also be stored as a single track for
single tracking applications. Also, it's possible to load a single track in a
multi tracking configuration.
A click on this arrow button will move the selected track (highlighted in
blue) one position upwards in the list box.
A click on this arrow button will move the selected track (highlighted in
blue) one position downwards in the list box.
•
Configure each desired track for
Multi Track
function as described for
Single Track
.
•
For storing/applying or deleting a
Channel Mode Configuration
use the
Config
button.
