Lightsheet Z.1
Center Screen Area / Image Containers - Display and Image Analysis
Carl Zeiss
02/2013
000000-1790-528
219
4.8.11
Settings
Flying mode
Ticking the tick box
Flying
mode activates the
mode, unticking deactivates it.
To show or hide an overview image, tick the
Show
overlay image
box.
The fly-speed can be adjusted in a range from 1
to 100.
Split Mode
Ticking this tick box activates a channel wise 3D
split view of the data. This is available in surface
render mode only. An overview image with all
channels combined can be shown optionally by
ticking
Draw combined image
.
Stereo
Two Stereo views can be chosen from this sub-
menu:
Anaglyph
is a view in which the data can be
examined in 3D using red/green glasses. The image
is built up twice (once each for the red and green
colors), resulting in a stereoscopic image.
The stereoscopic effect can only be seen with the aid of red/green 3D goggles. The red lens is to be used
for the right eye and the green lens for the left eye.
Camera offset
: Defines the distance of both cameras from each other (units in meters).
Parallax shift
: Determines the degree of shift which is necessary to correlate both camera views. The
slider should be adjusted to maximize the stereo effect. Please note, that this setting will be different for
each observer.
Fig. 330
3D Renderer Settings – Flying mode
Fig. 331
3D Renderer Settings – Split mode
Fig. 332
3D Renderer Settings – Stereo
Содержание Lightsheet Z.1
Страница 1: ...Lightsheet Z 1 Operating Manual February 2013 ZEN 2012 black edition ...
Страница 4: ......
Страница 170: ......
Страница 427: ...Lightsheet Z 1 Overview ...