Zeiss KF 2 ICS, Руководство по эксплуатации, Страница: 29 / 40

KF 2
ICS
Carl Zeiss
B 40-028 e 10/97 3-11
3.7 Photomicrography
The KF 2
ICS
microscope (with phototube) can be changed from observation to photography via the
pushrod (3-8/ 7 ). Special connectors and the T 2 adapter allow commercially available 35 mm SLR
cameras and special microscope cameras (e.g. MC 80
DX
) to be attached to the camera port of the KF 2
ICS
. For the use of the photomicrography equipment, please observe the relevant separate manuals in
addition to the information provided in this manual.
Assembly (e.g. CONTAX 167 MT)
Screw the T 2 adapter of the camera used on
the connector 2.5
for T 2 (3-8/ 4 ).
Attach the camera and fix the cable release
(3-8/
1 ), if required.
Loosen the three hexagonal screws (3-8/ 6 ),
remove the dust cover (3-8/ 8 ) from the
phototube (3-8/ 5 ) and insert the premounted
unit A in the phototube.
Align the unit in the required position and
tighten the three hexagonal screws (3-8/
6 ).
If focusing is not to be made via the
viewfinder of the camera, the
component with the photo reticle
must be screwed in the eyepieces
(also see section 3.3).
For detailed information on SLR
cameras please see manual G 42-
406/II entitled "35 mm SLR cameras
for microscopes and stereo-
microscopes".
Fig. 3-8 Assembly of a SLR camera
(CONTAX 167 MT)