Object markers in working position scolded. Cartridge hand has (with the thumb) to press upward, until lead attack to the left and
release (open for the pin chamber), afterwards (with index finger) shortly after down press (stamps).
Cartridge-handles press again upward, to the right lead and release (latches of the pin chamber).
Restart afterwards work objective.
The laid on points dry in less than one
Minute.
To the marking suitable surfaces: Glass, cover glass lacquer.
Points are steady against immersion oil and xylene;
immediately solving in water.
Regain:
Preparation after direct view in such a way on the Mikroskoptisch orient that the mark points lie symmetrically to the Objektfeld lit
up by the condensor lens.
Work objective switch on, the looked for object place lies in the field. For higher requirements at regaining accuracy: Marking
point with weak objective visit and preparation shift, until the points lie symmetrically in the field. Switch afterwards to
stronger work objective.
Cartridge change:
One proceeds in a general manner as descriptive under “installing”.
Maintenance:
The solvent of the ink in the pin cartridge is volatile. The pin chamber must be locked from there after each marking, if the marker is to
work reliably. En sehentlich left open markers becomes often again quick, if they are kept locked over night; giving if into the opened
pin chamber in bring and draw let some drops water; Chamber thereafter one while en closed hold. Otherwise cartridge replacement.
(28)
Maintenance
JENAVAL has a long life span. Maintenance and servicing are simple. Consider please the following references:
Carefully, before direct exposure to the sun, temperatures treat equipment over + 50 °C, frost, humidity, chemically aggressive
substances and - as far as possible - before dust contactors.
Instructions consider.
Dust on optical surfaces with Gummipuste remove or with nature hair brushes, which were degreased in alcohol and dried
thereafter. Enclosed cleaning cutlery en turn.
Persistent impurities and fingerprints with dust for free rag and/or leather and light gasoline remove. Not with alcohol! Front
surfaces of objectives with magnifying glass controlling (kidnapped immersion oil at drying systems!).
Immersion oil at rear objectives with dust free rag and light gasoline remove.
Objective caps and other plastic containers with xylene do not treat.
More diminishing or to heavy course of Grobtrieb, condensor lens impulse and Binokulartubus
►
(22)
Arising damage does not repair, equipment handed over at our responsible agency or treaty system place to examination.
Maintenance of the object marker
►
(27)
(29)
Wearing parts
Part number lamp HS S 5a 6 V 25 W 105.859/6Ringlinse for DF-
condensor lens 1.2 304313:002.04 /2 5 fiber pin cartridges for object marker 025250:001.28 /4 immersion oil 10 ml
