Zeiss Humphrey II-i series, Руководство пользователя

Страница: 55 / 580

Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
General Operation 2-15
Accessing the Vertex Monitor (Model 750
i
only)
1
Start at the System Setup screen. Select the Vertex Monitor
drop-down menu.
2
Choose between ON and OFF.
Note: When the Vertex Monitor is turned on, a beep will sound if the patient backs away from the
trial lens during testing. Although the test will not pause, a message will remain on the screen until
cleared by the operator. This feature only works if Gaze Tracking has been initialized successfully and
the trial lens holder is in the Up position. For additional information, see
“Vertex Monitor (Model
750i),” on page 5-6 .
Setting the Time and Date
1
Start at the System Setup screen. Select SET TIME AND DATE.
2
Select the Time Format drop-down menu.

Choose 24 HOURS or AM/PM from the drop-down menu.
3
Press TIME ENTRY. Input the correct time on the keypad, then press
ENTER.
Note: If you have selected the AM/PM format, you must enter either AM or PM with your time entry.
4
Select Date Format. Choose MM-DD-YYYY, DD-MM-YYYY or YYYY-MM-DD from the drop-down
menu.
Note: MM=Month, DD=Day and YYYY=Year.
5
Select DATE ENTRY. Input the correct date from the keypad, then press ENTER.