INTRODUCTION
Floor Stand S
Warning and information labels on the system
ZEISS
01/2017
435413-7144-010
5
Engl
is
h
Item Label
Explanation
1
Friction information
Explanation of brake effect achieved by rotating the friction adjustment
knob.
Turning to the left:
Reduces braking action
Turning to the right:
Increases braking action
2
Warning label "Danger of pinching"
Fingers may be pinched. Do not touch this area while the floor stand or
its parts are being moved.
3
Weight balancing on suspension arm
After installing the stereo microscope with all its accessories, the
setting screw for weight balancing of the suspension arm can be
adjusted.
Turning to the left:
Reduces weight
Turning to the right:
Increases weight
4
Warning label "Maximum load"
A maximum of 7 kg should be applied to the suspension arm.
5
Brightness adjustment
(Not active!)
6
Service information
7
Year of manufacture
8
Information label "Transport position"
During transport, the stand may only be held and shifted at this point.
Observe the operating manual and accompanying documents.
Shows the transport position for the device. Always bring the device to
this position before transporting in order to avoid damage to the
device.