BEDIENUNG
ZEISS
Fokussiertrieb am Stemi-Träger
Bodenstativ S
18
435413-7144-010
01/2017
D
eu
tsch
4.8
Fokussiertrieb am Stemi-Träger
•
Fokussierknopf am Stemi-Träger (Bild 3/
9
) drehen, um das Mikroskop in der Höhe zu verstellen bzw.
auf das Objekt zu fokussieren.
•
Durch gegenläufiges Verdrehen des linken und rechten Fokussierknopfes kann die Gängigkeit des
Fokussiertriebs an die Bedürfnisse des Nutzers angepasst werden.
ACHTUNG
Die Gängigkeit des Fokussiertriebs darf nicht so leicht eingestellt werden, dass sich der Trieb
eigenständig nach unten bewegt. Dies könnte zu Beschädigungen des Mikroskops oder des
Objekts führen.
4.9
Anwendungsbeispiele
4.9.1
Senkrechte Beobachtungsposition