Zeiss EXTARO 300, Инструкция по эксплуатации

Страница: 29 / 60

Instructions for Use Preparing system for use
Setting lowest position of microscope for safety
(1). Adjust the suspension arm to
allowable lowest position
that is still safe for operation
(2). Tighten the knob on the
right of the friction knob to
set the lowest position of
suspension arm
Finding ergonomic working position
(1). Adjust the height of suspension arm and
the chair to bring the microscope to
working area. The user should keep his/her
back upright while working with the
microscope. The working distance (WD) of
the microscope can be varied from 200 to
430mm.
(2). Adjust the focus to get a sharp image by
rotating the knurled ring of the varioskop
in clockwise or counterclockwise
directions.
Adjusting the tube
Rotate PD knob to adjust
pupillary distance (Unit: mm)
Adjust tube to a proper angle Adjust tube to a proper angle
WD
305935-3500-000 – 2.1 – 2017-12-15
28 / 59