START-UP
ZEISS
Mounting standard components
Axioscope 5/7/Vario
44
430035-7344-001
03/2018
3.1.3
Mounting the binocular
tube/photo tube
•
Loosen the screws (
3
) with the Allen
wrench (AF 3).
•
Remove the dust cover caps (
2
and
5
)
from the bottom of the tube and the dovetail
ring socket on the stand.
•
Hold the binocular tube (
1
) or the
binocular photo tube at an angle and insert it
into the stand socket with the dovetail ring
(
4
).
•
Then push it into a horizontal position. Turn the
binocular tube into the desired viewing position
and tighten the Allen screws with the Allen
wrench.
3.1.4
Inserting eyepieces or auxiliary
microscope or pinhole diaphragm
•
Remove both dust cover caps (
1
and
5
)
from the binocular tube.
•
Remove both eyepieces (
2
) from the
box and insert them into the binocular tube to
the stop.
•
Instead of an eyepiece you may insert an
auxiliary microscope (
3
) into one of the
binocular eyepiece tubes in order to observe
aperture, phase and darkfield diaphragms and
to center phase and darkfield diaphragms.
These diaphragms can be focused with the
adjustable eye lens of the auxiliary microscope.
•
The auxiliary microscope (Fig. 3-4/
3
) or the
pinhole diaphragm (Fig. 3-4/
4
) can be used to
observe conoscopic images.
Fig. 3-3
Attaching the binocular tube
Fig. 3-4
Inserting eyepieces