OPERATION
Axio Observer
TFT display touchscreen on the Axio Observer 7, 7 materials
ZEISS
12/2016
431004-7244-001
131
5.11.9
Settings
The
Settings
page can be accessed from the
Home
page by pressing the
Settings
button on the
navigation button bar.
The
Settings
page provides access to the following pages:
Components
,
User
,
Extras
and
Info
.
5.11.9.1
Settings -> Components
The
Settings -> Components
page contains the
six
Objectives
,
Reflector
,
Focus
,
Stage
,
Camera
ports
and
Misc
tabs.
(1)
Objectives
The user can configure the nosepiece fittings using
this tab.
Up to six buttons are displayed. Before any
objectives have been configured, the buttons are
labeled only with the numbers of the nosepiece
positions.
After an objective position has been configured,
the following data is displayed: objective name,
magnification, numerical aperture (NA), immersion
Once a new objective has been assigned, the corresponding objective button on the
Microscope
-> Control
page will be labeled with the magnification and immersion type.
The
Disable motor? - Yes
button can be used to deactivate the motor if an objective heater or
a piezo focus is fitted under the objective.
•
Press the relevant button to configure a turret position.
Fig. 119
Settings -> Components ->
Objectives page
Содержание Axio Observer Series
Страница 1: ...Axio Observer Inverted microscope Operating manual...
Страница 192: ......