OPERATION
Carl Zeiss
Operating the motorized microscope via the touchscreen of the TFT display
Axio Imager
120
430000-7344-001
M70-2-0020 e 06/2009
In the
Configure Objective #
popup window, you
can choose among various options:
−
Empty position
button
Deletes the existing objective configuration at
the position currently selected. Acknowledge
the safety query with
Yes
.
−
Manual
button
The user must enter magnification, numerical
aperture (NA) and immersion on his / her own.
(See Fig. 4-57.)
To execute the configuration procedure, press
the
Save
button. To abort the procedure, press
the
Cancel
button.
−
From list
button
The user chooses an appropriate objective from
the
Preselect Magnification
list and the
Objective list
(Fig. 4-58).
To execute the configuration procedure, press
the
Save
button. To abort the procedure, press
the
Cancel
button.
Several DIC prisms / sliders are allocated to
some of the objectives suitable for differential
interference contrast (DIC). Such allocation is
executed when the selection of the objective is
acknowledged.
Fig. 4-56
Microscope -> Settings ->
Components -> Configure objective
Fig. 4-57
Configuring objective manually
Fig. 4-58
Configuring of objective from list