Power supply
5
EN_20_012_0043l
4
Power supply
The system can only be operated with the following power supply.
Manufacturer: FSP, Model: FSP075-DHAN3
The power rating information listed on the type plate does not correspond
to the power required by the device. Rather, the power rating information is
only there for reasons of product safety and is intended to ensure the cor-
rect voltage and to protect the external supply source. The device's actual
power rating falls below these levels.
Before connecting it with the line supply, it is necessary to check if a selector
switch, when available, is set for the local line supply voltage. If in doubt, in-
quire at the energy provider responsible. The device must be grounded: via
the power supply or other appropriate measures.
The device must be secured by a building fuse of max. 16A to ensure safe
operation. Ensure that the power socket on the device or the line supply out-
let is freely accessible. The device can be disconnected from the line supply
by pulling the power cord.
For DC supply: the power supply voltage in the DC cable must match a con-
stant voltage classified as ES1 in accordance with EN62368-1. Before con-
necting the power supply cable, ensure you check the polarity of the power
supply voltage. When needed, a potential equalization for malfunction-free
operation may be necessary. With an external adapter, ensure that the
power supply circuit points on the device or the line supply outlet are freely
accessible. The device can be disconnected from the power supply by pulling
the power supply cable. Ensure that the cords are not a potential hazard
(tripping hazard) and cannot be damaged.
5
Ambient conditions
Operation:
+10°C
—
40°C
Storage:
-20°C
—
60°C
Humidity:
10%
—
90%, no condensation formation.
Correct performance cannot be ensured outside of these parameters.
The values may fluctuate when used with an uninterruptible power supply -
UPS (see the user manual for a UPS).
