ZEHUS BIKE+, Руководство пользователя

Страница: 19 / 36

19
3 sec!
0 km/h! 0˚!
%
BIKE+
Trip Slope
%
POWER MODE
Factory reset Slope Calibration
Save
Kers
min max
Bike +
Safari 100% 8:08 AM
5.2 Calibrate the slope sensor on your BIKE+ all in one
BIKE+ all in one features an advanced slope sensor that is very important to obtain the
correct and pleasant behavior while using some of the power modes (see 5.5).
!
NOTE: please check the calibration of the slope sensor carefully at the first connection.
A wrong calibration could lead to a non-correct and unpleasant behavior of your bike.
In order to calibrate the slope sensor, please place your bike on a flat surface (0% slope).
Then tap “slope calibration” and insert your PIN number. when prompted. This will start
the calibration procedure. Please refer to Figure 8 and Figure 9 for further information.
Figure 9: Calibration procedure
!
CAUTION: please DO NOT MOVE the bike during the calibration procedure! Errors may
occur if the bike is moved or inclined during the process.