En
gl
ish
-35-
HOW TO UPGRADE
DX 2000
Easy plug-and-play data transfer without PC
Below you can find another easy method to upgrade operating software by
easy plug-and-play data transfer from one receiver to the other.
1. Notice that both receivers, master and slave, are powered off .
2. Connect one
DX 2000
to another
DX 2000
by using RS 232 cable.
3. Switch your master receiver to stand-by mode.
4. Turn on the slave receiver by Power ON/OFF and check the front
display is "d.000". From now on the slave receiver will be upgraded.
5. During the download the
DX 2000
front display will show the progress
of the procedure, e.g. "d.062" means 62% data transfer finished.
6. After completed
download,
DX 2000
automatically
writes
downloaded data in its Flash Rom. Please wait until
it displays “good”
message on the Front Panel Display.
DX 2000
has to be re-booted
by power off/on if the procedure is completed.
Don t mix up different model types
DX2000CI
DX2000CI
DX2000CI
DX2000CI
and
DX2000SL
DX2000SL
DX2000SL
DX2000SL
!!!
