En
gl
ish
-21-
Fast edit mode allows you to edit channel fast
without showing channels selected.
If you turn off the Fast edit mode, the receiver will
show each channel selected in the TV Channel
Manager mode and it takes few seconds.
Note
: Fast edit mode is not default, when you
operate
DX 2000
for the first time.
GO TO FUNCTION
Many customers feel difficulty to set up the other
receivers, because the menu system is too
much complicate.
But the menu system of
DX 2000
is made by
Open Architecture Concept for users to move
their location to any other menu with one step in
our GO TO Function. This is the one of the
powerful function of
DX 2000
and allows
users to setting the system most easily in the
world.
How to use GO TO function.
1. Press MENU button in the menu.
2. Select a TV Channel in the Channel
Manager.
3. After your working in the TV Channel,
Press MENU button on the remote control.
4. Then menu box will be displayed.
5. Select Go To menu and press OK key.
6. Then sub-menu list will be displayed.
7. Select Timer and press OK key.
8. Then you can go to the Timer Page
directly
9. If you go back to TV Channel, repeat the
procedure of Go To function.
Fast Edit mode
