12
4.2.0
Access for Maintenance
4.2.1
To clean the valves
• Clean any valve present in your home at least every six months.
Supply valve ComfoValve Luna S125
The ComfoValve Luna S125 supply valve is equipped with a detachable design cover. Therefore this valve can
stay in the wall or ceiling during cleaning.
500mm
Side View
TopView
500 mm
250 mm
Keep hold of the valve on its outer edge and pull it
completely out of the wall or ceiling with a rotating
movement. If a rubber ring is fitted: Take care when
removing the valve to leave the rubber ring in place.
Step 1
Mark the location and setting of the valve.
• Do not change the settings of the valve as it would
negatively influence the system performance.
• Do not swap the valves with one another as it will
negatively influence the system performance.
Step 2
Remove the filter behind the valve (if present).
Step 3
Clean the valve with a soft brush, vacuum cleaner or
soapy water. Rinse the valve and then dry.
Step 4
Replace the filter behind the valve (if present).
Step 5
Place the valve back in the wall or ceiling. Note details on
the Service & Maintenance Log on page 13.
Step 6
Turn the design cover a quarter
counterclockwise
and
then remove it from the valve.
