7. MAINTENANCE / CARE
7.1 General
Maintenance of the unit for the end user is limited to the periodic cleaning of the filters and
the intake / exhaust air valves and grilles. Twice a year, the texts “FIL” followed by “tEr”
appear alternately on the display as a reminder to clean the filters. Cleaning of the valves /
grilles is recommended at the same time as the cleaning of the filters. The system must not
be operated without filters. Switch off the unit at the three-position switch or mains power
switch before changing the filters.
7.2 Filter
Changing
Fig. 9 - 1
•
Change the filters at least once a
year.
•
To change or clean the filter, loosen
the 6 screws (A). In the case of
ceiling-mounted units, the
condensate drain must also be
removed. Then remove the front
cover.
•
The unit is equipped as standard with
an outside air filter (A) and an
exhaust air filter (B) of Class G4.
•
Pull the filters out of the unit from the
front and clean using a vacuum
cleaner or replace.
•
Push the filter into the holder again
and check that it is seated correctly.
•
Fit the front cover again and secure it
with the screws. In the case of
ceiling-mounted units, fit the
condensate siphon again.
•
Switch on the unit again and cancel
the filter change display with the
button OK.
B
A
C
Содержание Comfoair 140
Страница 1: ...Comfoair 140 Manual ...
Страница 6: ...3 2 Dimensions ...
Страница 9: ...Cover element for wall installation option Figure 3 Ceiling Mounting ...
Страница 22: ...10 ANNEXES 10 1 Electrical Circuit Diagram Comfoair 140 ...