ZyPerUHD
System Elements
Encoder Function
The function of the ZyPerUHD Encoder Device (Encoder) is to accept audio and video data over
a variety of interface types, and translate that data to a format suitable for transmission over a
standard 1Gb Ethernet network.
Video data is segmented, compressed using JPEG2000, prepared for transmission, and sent by
the Encoder unit. No unit other than those so designated by the control entity shall be able to
receive the video stream sent by an Encoder.
The format of the IP data is fully in compliance with industry-standard IEEE 802.3 Ethernet
networking practices. Any switch or device capable of passing 1Gb Ethernet traffic can be
employed to carry ZyPerUHD A/V traffic.
Other ports on the Encoder devices are for the carriage of USB, IR, RS232 and audio data.
Common Interfaces on all Encoders:
•
Power Input (12VDC)
•
RS232 Input/Output (Phoenix connector
with supplied adapter)
•
Analog Audio Input/Output (Phoenix
connectors with supplied adapters)
•
Infrared Input/Output
•
HDMI Input
•
HDMI Output (loop-out)
•
USB Type-B interface
•
1Gb Ethernet port (RJ45 with PoE)
Decoder Function
The function of the ZyPerUHD Decoder device (Decoder) is to accept 1Gb Ethernet traffic that
represents the information to be decoded and displayed. When the appropriate IP stream is
received the Decoder unit will decompress it, reformat the video and audio information for
display and play it out its HDMI video output. Audio is also played out the appropriate port as
included.
Other ports on the Decoder devices are for the carriage of USB, IR, RS232 and audio data
User Manual
Page of
4
29
