Page 4 of 8
www.zeevee.com
Getting Started
ZvBox 160 Front Panel
1
2
Description
Function
1
LED
Signals the activity of ZvBox 160. Also used in programming
2
Setup Button
For setting broadcast channel
The LED shows solid blue during normal operation. During startup it will show:
Fast flashing blue/yellow (~20 cycles), followed by fast blue blink (~100 cycles),
followed by slow blue blink (~40 cycles), followed by solid blue that blinks twice after
30 seconds and returns to a solid blue. Video transmission begins when the LED
becomes solid blue. Continuous blue/yellow flashing LED indicates trouble found during
boot-up.
1
2
3
4
5
6
Description
Function
1
RF Coax Output
Encoded video as a well-formed QAM channel
2
S/PDIF audio input, RCA
Accepts digital audio input (PCM or AC3)
3
S/PDIF audio input, Optical
Accepts digital audio input (PCM or AC3)
4
Component Video input
RCA connectors, 75 Ohm. Y, Pr, Pb
5
USB Control
PC configure/control interface
6
DC Power
DC power input, 12 volt
7
Reset
Restores factory defaults
To restore factory defaults:
Remove the power. Depress and hold the reset
button. Reapply power. LED will flash blue/yellow (~20 cycles), followed by fast blue
blink (~20 cycles), followed by *solid yellow*. Release the reset button. The unit
will then restore all factory defaults and go through a full reboot.
7
ZvBox 160 Back Panel
