Page 8
|
HDbridge 2920i Configuration Guide
www.zeevee.com
Maestro Configuration
Maestro is a configuration tool that you use optionally to
customize your system beyond what is allowed by the front
panel. For example, using Maestro you can assign a channel
number (virtual channel) independent of the RF number and
label the channels.
Connecting with Maestro
1.
Connect your computer directly to the ZeeVee modulator
using a standard Ethernet cable (not a cross-over cable) or
connect the unit and your computer to any LAN that has a
DHCP server.
2.
An IP address appears
at the top of the front
panel display.
3.
Using any web
browser (Chrome or
Firefox preferred),
enter the IP address to launch Maestro.
4.
You will be directed to a login
page. Your user name is always
“
admin
.” The default password
is “admin” but you can change the
password. Login is case-sensitive.
5.
After you log in, the Maestro Status tab appears. Here you
can see the general status.
Configuring RF numbers and virtual channels
1.
Click on the RF Channel Plan tab.
2.
Click in the RF # field and enter the RF number as you
choose from the RF Frequency Map (on page 7).
3.
Click in the Channel # field and enter a channel number
(virtual channel). The channel number is what the TV
displays. You can configure a channel number two ways:
• As a dotted number — Enter the number with a “.”
following it, for example, “5.1”. This is the default display.
• As a dotless number — Enter the number with a “#”
preceding it, for example, “#5”.
Note that you can choose a channel number that is different
from the RF#. For instance, if your RF# is 3, you can choose a
channel number of 10.1 or #10.
4.
Click Apply to save changes. Your unit stores configurations
so they are not lost on power-down.
5
. Run Auto Scan at TV (see Tuning your channel at the HDTV,
page 5) when you have saved configuration changes.
Labeling channels with channel and content
information
1.
In the RF Channel Plan tab, click in the Name field and enter
the channel short name (up to 7 characters).
2.
Click in the Long Name field and enter the long or more
descriptive channel name (up to 63 characters). The TV
displays these names and descriptions when the channel is
changed or info guide information is requested.
3.
Click Apply to save changes.
IP address
