HDbSeries Modulator Get Going Guide
Page 5 of 8
Ver.011513
In most cases, HDb2000 modulators will only require setting the RF and HDTV broadcast channels.
1. Connect your computer directly to the HDb2000 using a standard Ethernet cable (cross-over cable not
required), or connect the HDb2000 to any LAN that has a DHCP server.
2. After a few moments, an IP address will appear at the top of the front panel display.
3. Using any web browser, go to the IP address to launch Maestro, the configuration tool.
4. You will be directed to a login page:
User Name: admin
Default Password: admin
The User Name will always be “admin.” The default password
is “admin” but it can be changed in the configuration tool.
NOTE: Login is case-sensitive.
5. Tabs across the top allow for different configuration actions.
Click on “Channel Plan” to set the RF channels, channel
names, etc.
6. Click “Apply” to save your changes. Settings are stored in the
unit and not lost on power-down.
Configuring HDb2000
Click
Apply
to save your
changes.
