- 7 -
16.
IGN. MAP SW
Enabling, or disabling ignition map switch, for changing ignition maps while riding.
Enter menu and move to
Ign. Map SW
with pressing + or - and then press enter .
Now you can enable or disable external switch with pressing + or - and then press enter .
17. NUMBER
OF
PICKUPS
PDCI
can run with 1, or 3 pickups.
When using one pickup, then all 3 ignition coils fire at the same time.
Enter menu and move to
Nr. of Pickups
with pressing + or - and then press enter.
Now you can change nr. of pickups with pressing + or - and then press enter .
18. IGNITION
TEST
Spark execution test without running engine. Spark can be optically checked, with removed
spark plug connected to plug cup and to the ground.
Enter menu and move to
Ignition Test
with pressing + or - . With pressing enter multiple
spark will occur, for about 1s for each output channel.
19.
MECHANICAL SETTINGS (Static Angle)
Static Angle
is ignition advance angle, set with stator (generator).
Measure this angle with dial gauge. This measured
Static Angle
is your maximum advance
angle you can set with
PDCI
.
Calculating mm to deg or vice versa:
