Zeegma Vitamine Go, Руководство пользователя

Страница: 6 / 65

EN
so that it can cool down, and then remove surplus of food.
List of parts (fig. A)
1. Lid
2. Glass container
3. Blade
4. Body of the device
5. On/off switch / indicator
light
6. Base
7. USB-C port
Cut power switch in the form of a button is located underneath the
device.
Charging
• Connect the device to the mains charger via the USB-C port
(7, fig. A). Use a 5V, 2A power adapter.
• During charging, the indicator light (5, fig. A) glows red.
• Fully charged – the light illuminates in white.
• Battery discharged – the light will turn red ten times.
• It is recommended to charge the device for about 3-5 hours.
While charging, the device will not turn on.
Device operation
• Make sure the silicone ring is in the right place (fig. 9).
• Before you start blending, make sure the glass container is
tightened firmly and the indicator light has turned white five
times. If the container is not properly tightened, the indicator
light will turn red five times.
• The maximum temperature of liquids is 40°C.
• The amount of ingredients should not exceed the maximum
amount indicated on the glass container.
• In the event of overloading or blockage, the device will
automatically turn off and the light will alternately turn white
and red.
Blending function
1. Cut the ingredients into smaller pieces about 1.5-2 cm in size (fig. 1).
2. Place the ingredients in the glass container (fig. 2). Tighten the
lid (1, fig. A). The recommended amount of ingredients is 100 g