26
CN2x4 SIP Phone User’s Manual
1).
Dial out the third party's number (user C, 1003), and pick up the handle or use handfree
speaker to make a call;
2).
The conversation is built up after user C answered the phone.
Representation:
Line1 indicator is on always, the screen displays:
3.
switch the calls:
User A can recover the conversation with user B with or without hangup the conversation with
user C.
•
No hangup
1).
Press <Call1> to recover the conversation with user B, and hold user C.
2).
Press <Call1> again to switch between two calls.
•
Hangup
1).
Flash the hook or hangup the phone to cut off the current conversation in off-hook state.
2).
Press <Speaker> to cut off the current conversation in handfree state.
Palying "DUDU" alarm tone if there is reserved conversation, and the screen shows the
reserved number like this:
3).
Press <Call1> again to recover the conversation with user B.
4.1.9.2
Multiple Line Calling
Multiple line calling is making calls with more than two people on multi-lines (with different
numbers).
Prerequisite:
set lines beforehand (the configuration, see 7.3 Call Settings)
1.
User A and user B are in conversation (the current line is Line1 in off-hook state);
Representation:
Line1 indicator is on always (the handfree light is on always in handfree state), the
screen displays:
Connecting:
1003
00:01:30
用户
B
的电话号码
pending
2007-11-30 14:50:05
CN2x4
1002 pending
Содержание CN2x4
