10
CN2x4 SIP Phone User’s Manual
2.2
Installation
•
Choose a dry ventilated place to place the phone, right side is up.
Connect to 10Mpbs or 100Mpbs network via RJ45 terminal, like LAN, Ethernet broadbank
access, ADSL, or Cable Modem access.
Please confirm the connection before power-on. Wrong power adapter will damage the
phone set. Good connection with ground reduces voltage surge caused by lightning and
improves speech quality, so make it sure. (check the connection with ground when speech
quality is not good enough )
•
Installation steps:
As below:
1).
Connect the handle and the base: plug one terminal of the
telephone cord into the handle port, another one into the port
of the base.
2).
Connect the phone with network: plug one terminal of the
Ethernet cable into the Ethernet port on the bottom side of the
phone, plug aother terminal into the port of a switch, a hub, a
DSL router, a Cable modem or other equipment.
Figure 2-1
Содержание CN2x4
