Zeck Audio Profiler 14.1000, Руководство пользователя

Страница: 19 / 41

19
PROFILER 14.1000
Owner`s manual Profiler 14.1000 © Zeck Audio
2. Master section
The two master faders (49) are the
final volume control for the mixer.
If the PFL LED (39) is dark, the two-
row LED chain (38) shows the level
of the stereo master signal.
2.1 Master EQ section
The 5-band master EQ's (42) main
purpose is room-acoustic compen-
sation. For this reason the frequen-
cies are tuned differently from the
channel EQs. Frequency corrections
of the PA speakers should be done
extremely carefully with the master
EQ and preferably in a subtractive
manner - the Profiler has a powerful
amplifier! Excessive boost of treble
frequencies always increases the
danger of noise and feedback.
If you think your Profiler should
produce some more top and bottom
end, use the DIGITAL SOUND PRO-
CESSOR switch (see 2.10). As a rule,
the master EQ should always be ad-
justed before the channel EQs, pre-
ferably with a test CD through the
AUX RET jacks (23).
2.2 Insert jacks
The master INSERT LEFT/RIGHT jacks
(20) allow to send the master signal
through an external effect device
before it enters the power amplifier.
The pin layout is the same as on the
channel insert jacks (tip=send,
ring=return).
These insert jacks also allow the
connection of Zeck DCA 501L active
subwoofers for an active two-way
PA system. The DCA 501L's built-in
active crossover filters out the bass
frequencies for its own amplifier,
sending back only the highs to be
amplified by the mixer. Appropriate
Y-cables for this kind of setup can
be ordered from Zeck.
2.3 Amp In
Whenever you want to use the PD's
internal power amplifier for external
sources, e.g. an external mixing con-
sole,the AMP IN LEFT/RIGHT jacks
(21) are the right inputs. Inserting a
phone plug into these jacks auto-
matically disconnects the power
amplifier inputs from the rest of the
mixer. The master faders do not
work in this mode.
This input is also usable for the
mixer's own purposes: whenever
one wants to use an external power
amplifier through the Line Out out-
puts, the unemployed internal amp
can be operated as a monitor power
amplifier by running a
Y-cord from the MONITOR SEND
(27) jack to the AMP IN jacks.
2.4 Mono Out
Having a monaural signal available
is handy for driving subwoofer
speaker systems or remote back-
ground speakers. The MONO OUT
jack (26) provides a line-level
monaural master signal, mixed
together from the left and right
channel. The signal level of this out-
put is sufficient for driving external
power amplifiers and is controlled
by the MONO OUT control knob
(31). It is also affected by the
master faders.
2.5 Line Out
The Line Out jacks (22) carry the ma-
ster signal and are electronically lo-
cated between the master EQ
section and the master faders. For
this reason, the line-out level is not
affected by the master faders but
can be level-controlled by the LINE
OUT control knob (32).
Fig. 4
Profiler 14.1000
Master section
20 21 22 23 24 25
28
27
26
33
32
31
36
38
40
39
41
42
44
45
46
47
48
50
49
29
30
34
35
37
55
43
56
57
58
59
60
61
63
62
64
65
52
53
51
54