INCLUDED IN KIT
1pc
I/O Expansion Board
1pc
27” 6pin Harness
THEORY OF OPERATION
The Zebsboards I/O Expansion Board expands the button input functionality of the
Zebsboards V3 (and higher) Digital/Analog Plunger by moving the button inputs off the
existing control board location and on to the Expansion Board using the I2C protocol.
By moving the button inputs off the plunger and on to a separate board this frees up pins on
the plunger control board allowing for the addition of 2x 4-way Dpad inputs that use the Hat
Switch function in the control panel. These Dpad controls can then be used for adding
joysticks or 8 specialty buttons in software that supports it.
Installation of the plunger requires the Zebsboards V3 (or higher) plunger to be updated to the
V4R51 (or higher) firmware for proper operation.
Existing keyboard codes from the previous firmware are retained within the button 1 – 16
range and the tilt button is moved to button 17.
Содержание V4R51
