Zebra-Tech Ltd
D-OptoLogger Operation Manual
5
Figure 1:
D-OptoLog serial port selection window.
With most computers the D-Opto Logger will be connected to com port number 1.
However, if the D-Opto Logger is connected to the computer’s USB port via a
USB to serial converter, the port number will probably be either com port 4 or 5.
The selected com port is maintained in an configuration file on the PC.
Once the correct port has been selected, and the ‘OK’ button pressed, the
computer will start communicating with the D-Opto Logger. This may take up to 8
seconds, and when communication has begun the D-OptoLog main window will
open (Figure 2).
