Zebex Z-6082, Руководство пользователя

Страница: 14 / 25

Dual-Laser Omnidirectional Vertical Scanner 10
U
SER
’
S
M
ANUAL
Beeps
A beeper gives audible feedback on scanner operation.
Beeps Indication
One beep A barcode has been successfully decoded.
Four beeps in series This indicates the scanner passed the power on
self-test and is operating properly.
Two beeps: low-high
The scanner has entered
programming mode.
Two beeps: same tone Scanner has returned from programming to
normal mode.
Continuous tone This is a failure indication. Return the unit for
repair.
Changing the Beep Volume
The scanner can be programmed with the Programming Guide to change beeper
tone, volume and duration; the beeper volume can also be changed by using the push
button.
The default beep volume is loud. There are three sound levels: loud, medium, and
low.
Press and hold the push button for about 5 seconds. The scanner will cycle to its next
level. Repeat till the desired level is reached.
Note: The volume setting is saved in volatile memory. That means the change will lost
when the scanner powers down. On next power up the scanner resets to the
configured setting. If you wish to keep the changed the volume setting, use the
Programming Guide to set the changes.