7
Setting waypoint through physical buttons
1.
Press and hold the power button 3s to power on
2.
Press and hold the left button to make the slider run to the desired position
3.
Double-click the power button to set the A point
4.
Long press the right button to make the slide run to the desired position
5.
Double-click the power button to set point B
6.
Double-click the power button to start or click (left button/right power
button) to start looping.
1.
Press and hold the power button 3s to power on
2.
Holding the Waypoint Release Button 1s and flash green light
3.
Drag the platform on the slider to your preferred position
4.
Double click the power button to set point A
5.
Drag the platform on the slider to your preferred position
6.
Double-click the power button to set point B
7.
Double-click the power button to start or click (left button/right power
button) to start looping
(Due to the large torque of the motor, more force is required when dragging the
platform, please hold the support leg of the slider with one hand and drag the platform
with another hand set up waypoint.
Physical button can only set AB two points, cell phone APP can set multi-point track.
