Zeal-All ZA-CF3NVG, Руководство пользователя

Страница: 6 / 9

CPU_FAN
SYS_FAN
JSATA1
JSATA2
SATA 2
SATA 1
+5V 2. GND 3.GND 4.+12V
USB3.0
USB3.0
DDR3
Note: these fan connectors are not jumpers, and the jumper cap is placed above the head.
Installation memory:
1. Please turn off the power before installing or removing the
memory, and dial down the AC power cord.
2. Carefully hold both ends of the memory stick, and do not touch
the metal contact above.
3. Align the gold fingers of the memory stick with the memory stick
slot, and pay attention to the convex point of the gold finger socket
to the upper slot in the direction;
4. Insert the memory stick 30 degrees into the memory slot, and
then press the memory stick down to the sound of "click"
The memory has been installed successfully and can be used
(note: press down the memory bar to avoid damaging the memory
too much)
Memory installation diagram (for reference only) :
Note: static electricity damages electronic components of a computer or memory,
so before following these steps,Be sure to touch the grounded metal objects briefly
to remove static electricity from your body.