SECTION 2 - DISMANTLE AND REASSEMBLE
To remove the power inflator valve core (Item
31). First unscrew the lock ring (Item 28 right-
hand thread) and remove the flexible rubber
button and button support (Items 29 and 30).
Unscrew the valve core using a suitable valve
core key APTP29.
If the rubber seal on
the valve core is not removed intact on the
valve core, the seal should be carefully
picked out of the valve body (Item 2) and
replaced with valve core.
If the seal is acci-
dentally pushed into the valve body it can usu-
ally be shaken out through the bore of the QD
nipple. It is essential that the old seal is
removed from the valve body.
After removing the power inflator valve core as described in 2.1,
unscrew the lock ring (Item 18) and remove the front cover and
diaphragm assembly.
2.2 REMOVING AND DISMANTLING THE REGULATOR VALVE ASSEMBLY
2.1 REMOVING THE POWER INFLATOR BUTTON ASSEMBLY
☛
Seal
Item #28
Item #29
Item #30
Item #31
Valve Core
Item #19
Item #21
Item #20
Item #22
Item #18
Item #17
Make sure “Rubber
Seal” is not left in
valve core.
Item# 2
