Zeagle N2iTion3, Руководство пользователя

Страница: 24 / 44

18
Dive Mode:
The
N2iTion3
will automatically enter Dive Mode when the E (TOP)
buttons come in contact with water.
Hold A
•
(LEFT) To switch to Demand A or Demand B screens.
Hold B
•
(MODE) To move to MIX Change.
C
•
(RIGHT) To go to Compass Mode.
Hold
•
C (RIGHT) to save a bookmark in the dive profile.
Less than 1.2ft No-decompression dive
Non-decompression limit
PGT level
Current Depth
PGT (Pressure Gas in Tissue) graph: This indicates the level of •
Nitrogen with nine level indicators.
OLI (Oxygen Limited Indicator) graph: This indicates the level of •
Oxygen limit with eight level indicators.
Nitrox Icon: This Icon is ON when FO2 has been set to other than AIR •
(21%). It blinks if the FO2 setting is the default setting. (Dive Mode)
Current depth: Indicates current depth, measured once per second. •
Maximum depth: Displays the maximum depth recorded during the •
current dive. If depth is over 328ft (99.9m) the display shows “- - -”
Dive Time: Current running time for this dive, starting at 4ft (1.2m) •
A dive time of 3 minutes or more is considered one dive, and is num -
bered in the log in order starting at 1. Dives of less than 3 minutes are
not logged in the profile.
Dive Time Alarm icon: Displays if there is a Dive Time alarm is set •
Depth Alarm icon: Displays if a maximum depth alarm is set. •
Ascent rate indicator: Shows current ascent rate during the dive. •
Dive graph display: Charts the depth of the dive over time. Shown at •
the top of the display, the blinking line shows the current status.