background image

5

CAUTION

Scuba  products  are  subject  to  conditions  of  extreme  wear  and  cor-

rosion.    Inspection  and  maintenance  are  required  to  ensure  contin-

ued  performance.    Zeagle  recommends  that  you  have  your  regulator 

inspected  and  serviced  once  a  year  on  the  anniversary  date  of  its 

purchase  at  any  authorized  Zeagle  dealer  worldwide.    Zeagle  Scuba 

equipment should be used by certified Scuba divers only.

WARNING

1.  Scuba  diving  is  an  adventuresome  activity  that  involves  a  degree 

of  risk.    Zeagle  Systems  Inc.  Self  Contained  Underwater  Breathing 

Apparatus (SCUBA) equipment is only to be used by those trained and 

certified  by  a  nationally  recognized  scuba  training  agency.    Diving 

without  the  necessary  training  in  safe  diving  procedures,  or  without 

observing the practices outlined by your training agency for your level 

of  certification,  is  extremely  hazardous  and  could  result  in  serious 

personal  injury  or  death.    This  owner’s  manual  is  in  no  way  meant 

to  be  a  substitute  for  the  instruction  received  from  a  certified  scuba 

training agency.

2. Zeagle regulators must be serviced only by dealers or technicians 

trained  and  authorized  to  service  Zeagle  Scuba  equipment.    At  no 

time  should  any  unauthorized  person  attempt  to  repair  the  regulator 

or  adjust  any  nuts,  bolts  or  screws  other  than  those  used  to  mount 

the regulator to, or dismount it from the tank valve.  Scuba equipment 

that is not properly serviced might malfunction during use, putting the 

diver at risk of serious personal injury or death.

Содержание CW Octo 320-5010




















Отзывы: