25
User’s manual
EN
Model
m² (ft²)
T1
T2
T3
T4
8350EL0
2000 (21520)
10:00 12:30
15:00 17:00
3000 (32280 ')
10:00 13:00
16:00 19:00
4000 (43040 ')
08:00 11:00
14:00 17:00
20:00 23:00
5000 (53800 ')
08:00 22:00
6000 (64560 ')
07:00 23:30
7000 (75320 ')
05:00 23:30
Re-entry to charging station
⏎
P1
P2
P3
10:30
Sets the distance between the robot and the perimeter wire during its re-entry
to the charging station.
⏎
⏎
25
cm
50
cm
75
cm
100
cm
0
cm
max
10:30
“0 cm”. This setting is recommended for complex gardens with many
obstacles near the perimeter wire and gardens with narrow passages. The
robot will position its wheels on either side of the perimeter wire to return to
the charging station.
Install the perimeter wire using the “On the Wire” method,
refer to the section “Re-entry method to the charging station”.
With the remaining parameters the robot returns to the charging station while
maintaining the approximate distance set from the perimeter wire. This option
is recommended for gardens with steep slopes and/or gardens without bumps
near the perimeter wire.
Install the perimeter wire using the “V-Meter” method, refer to
the section “Re-entry method to the charging station”.
Rain sensor
⏎
P1
P2
P3
10:30
Sets the behaviour of the robot when the sensor detects rain.
⏎
⏎
10:30
off
on
DELAY
10:30
ON: when rain is detected, the robot returns to the charging station. At the end
of the charging cycle, the robot resumes its normal operation if the sensor no
longer detects rain.
DELAY: when rain is detected, the robot returns to the charging station and
stays there for the time set, which can be configured in the next screen when
the “Delay" button is pressed.
OFF: the rain sensor is turned off.
Содержание PRO TECH35 i
Страница 1: ...TECH35 i...
