4.3 Initial settings - Battery
1.Advanced
settings
1.Battery parameters
1. Battery type
2. Depth of Discharge
3. Save *
“Password 0715”
1. PYLONTECH
4. WECO
Depth of discharge
50%
EPS depth of discharge
80%
Safety Buffer
10%
* After setting the parameters,
confirm by moving the cursor to
“Save” and press
2.AZZURRO
***4. Importing battery parameters
1) Turn the PV circuit breaker to the OFF position and disconnect the inverter from the grid
14. CHECKING FOR CORRECT OPERATION
2) Restore AC voltage by raising the dedicated switch:
Hybrid Inverter
OFF
GRID
OFF
1
2
Battery
OFF
3
ON
Hybrid Inverter
GRID
OFF
Battery
1
2
3
OFF
3) Check that the power value taken from the grid display is approximately equal to the power consumption
shown on the meter, or obtained by using a current clamp to measure under the import/export meter.
NA
NA
