16
User manual
EN
ProlonGed inacTiviTy and reSTarTinG
If the robot has not been used for a long period of time, a series of operations must be performed to guarantee proper functioning
at the time of reuse.
1. Remove the robot from the water when its batteries are fully charged. Usually, before the start of the first daily work cycle.
Alternatively, disable the work times of the robot or the days of activity, and extract it after at least 4 hours of recharging.
2. Have routine maintenance performed by an authorised dealer. This is essential for keeping the robot in good working order.
The assistance usually includes the following operations:
•
thorough cleaning of the robot, turbines, filters and all the moving parts.
•
checking of robot functioning.
•
checking and, if necessary, replacement of any worn parts such as filters, turbines, brushes.
•
checking of the battery capacity.
•
if necessary, the dealer can download the operating statistics, check for any faults and load any new software updates.
3. Thorough cleaning of the robot, turbines, filters and all the moving parts.
4. Check for any worn or damaged parts, such as filters, turbines, brushes and if necessary, replace.
5. Store the robot in a protected and dry place with an ambient temperature between 10° and 20° C, out of reach of children, pets,
other foreign objects, etc. Store the robot at a temperature below 20°C in order reduce the automatic discharge of the batteries.
6. Disconnect the power plug from the power supply unit.
7. For correct maintenance of the batteries, recharge the robot at least every 5 months.
restarting
Before restarting the robot after a long period of inactivity, proceed as follows.
1. Connect the plug of the power supply unit to the electrical outlet.
2. Reconnect the main electrical power supply.
3. Gently immerse the robot in the water and place it on the charging plate. If positioned correctly, the leds will light up continuously.
4. The robot is now ready for use.
Содержание Marlin
Страница 1: ......
