802.11ax Access Point
User Manual
58-150006-IQN_V1.0
Page 6
C
HAPTER
4. T
HE
H
TTPS
I
NTERFACE
The AP can be configured through its supported software interface HTTP. The HTTP interface can be accessed using
any standard web browsing software through any network. This chapter explains all the elements that are available on
the HTTP interface of the AP.
Note:
The default Username is
root
and Password is
password
.
Note:
Click
Reset button to return the parameters on the page to their previously saved state.
Note:
Click
Save button to accept and save the modifications made on the page.
Note:
Click
Save & Apply button to save and apply the modifications made on the page.
4.1. Login to the HTTPS Interface
To access the HTTP
S
interface on the AP, enter the IP address of the AP into the web browser’s address bar and
press the Enter key.
Enter the Username and Password in the respective textboxes and click the Login button. To return the information,
displayed in the textboxes to the defaults, click the Reset button.
In a default access point configuration is TAP mode.
If you want to switch in FAP mode, please change it in
system
→
AP Mode,
choose FAP and click
Save & Apply
to
switch it from TAP to FAP.
4.1.1 Thin and Fat AP Switching
Click
System
→
AP Mode,
choose the AP mode you want and click SAVE&APPLY.
Содержание SP250
Страница 1: ...ZCOM SP250 SP250 S5 11ax Access Point...