Zcom SP250, Инструкция по эксплуатации, Страница: 55 / 62

802.11ax Access Point User Manual
58-150006-IQN_V1.0
Page 52
The following parameters are available in this section:
Parameter Description
Restrict to address
family Select the IP address family that will be restricted here. Options to choose from are
IPv4 and IPv6, IPv4 only, and IPv6 only.
Restrict Masquerading
to given source subnets
To restrict the masquerading function to a given source subnet, enter the IPv4 subnet
of the source here. This option is not available for the IPv6 address family.
More than one entry can be created.
Restrict Masquerading
to given destination
subnets To restrict the masquerading function to a given destination subnet, enter the IPv4
subnet of the destination here. This option is not available for the IPv6 address family.
ore than one entry can be created.
Force connection
tracking
Select this option to force connection tracking.
Enable logging on this
zone
Select this option enable logging on this firewall zone.
The following parameters are available in this section:
Parameter Description
Allow forward to
destination zones
Select the destination zone here. Traffic is forwarded to this zone from the "newzone".
Allow forward from
source zones
Select the source zone here. Traffic is forwarded from this zone to the "newzone".
4.3.3.6. Diagnostics
This page provides useful network utilities that can be used to troubleshoot network connectivity between the AP and
other networking nodes.
The following parameters are available in this section:
Parameter Description
Ping
To use the ping utility, enter an IPv4/IPv6 address or domain name in the textbox and
click the Ping button. The ping utility is used to send an ICMP request to nodes to
probe if the node is active or not.