SP230/SP230-S5
2x2 PtP/PtMP 802.11ac Wave 2 Outdoor Access Point
QSG
2
Two-dimensional Mounting Kit (Optional accessory_SP-MKM5)
Pole-Mount
Attach the intermediate steel plate to the
device using four M5 screws (included in the
packaging). Securely tighten the screws.
Attach the two-dimensional mounting
bracket to the intermediate steel plate using
four M4 screws (included in the packaging).
Securely tighten the screws.
Attach the pole-supported bracket and align the area where the flat head screws will be
attached. Insert two flat head screws into two-dimensional mounting bracket, and tighten
them approximately.
Note:
The pole-supported bracket can accommodate up to 6 cm (2.36”) in diameter.
Wall-Mount
Separate it into two parts: half-mounting
bracket and M-type bracket and unscrew
four hex head machine bolts on the two-
dimensional mounting bracket.
Attach the intermediate steel plate to the device
using four M5 screws (included in the
packaging). Securely tighten the screws.
Attach half-mounting bracket to the device
with intermediate steel plate using four M4
Attach M-type bracket to the device onto the
wall, using four M5 screw anchors
