zBoost Trio Workspace ZB570, Руководство пользователя

Страница: 16 / 20

zBoost
®
TRIO Workspace ZB570 Manual
9
Technical Specifications
This product is covered by patent US 7,706,744. Other U.S. and foreign patents pending.
Product Specifications for zBoost TRIO Workspace ZB570V
Verizon LTE PCS CEL
Frequency
Uplink: 776—787 MHz
Downlink: 746—757 MHz
Uplink: 1850
—
1910 MHz
Downlink: 1930
—
1990 MHz
Uplink: 824
—
849 MHz
Downlink: 869
—
894 MHz
Band supported 13
A, D, B, E, F, C A, B, A’, B’
System gain 58 dB 64 dB 58 dB
Output power 3 dBm 4 dBm 3 dBm
Networks LTE (Verizon)
CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS,
HSPA, 3G
General Specifications
Power Consumption 3W standby; 7W max signal - 2.5A Max
Wall Supply Input ; Voltage 100-240VAC, 50-60 Hz; 5.0VDC
Input and Output Impedance TNC Connector: 50 Ohm; F Connector: 75 Ohm
System Certifications FCC Parts 15 & 20, Industry Canada
Base Unit Size and Weight 5” x 7” x 1.25” – 9 oz.
Operating Conditions Indoor Use Only (40° - 105° F)
Coverage (open areas) Desk area - Up to 1,500 sq. ft.
Product Specifications for zBoost TRIO Workspace ZB570A
AT&T LTE PCS CEL
Frequency
Uplink: 704—716 MHz
Downlink: 734—746 MHz
Uplink: 1850
—
1910 MHz
Downlink: 1930
—
1990 MHz
Uplink: 824
—
849 MHz
Downlink: 869
—
894 MHz
Band supported 17
A, D, B, E, F, C A, B, A’, B’
System gain 58 dB 64 dB 58 dB
Output power 3 dBm 4 dBm 3 dBm
Networks LTE (AT&T)
CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, UMTS,
HSPA, 3G
General Specifications
Power Consumption 3W standby; 7W max signal - 2.5A Max
Wall Supply Input ; Voltage 100-240VAC, 50-60 Hz; 5.0VDC
Input and Output Impedance TNC Connector: 50 Ohm; F Connector: 75 Ohm
System Certifications FCC Parts 15 & 20, Industry Canada
Base Unit Size and Weight 5” x 7” x 1.25” – 9 oz.
Operating Conditions Indoor Use Only (40° - 105° F)
Coverage (open areas) Desk area - Up to 1,500 sq. ft.
The Manufacturer’s rated output power of this equipment is for single carrier operation. For
situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB,
especially where the output signal is re-radiated and can cause interference to adjacent band users.
This power reduction is to be by means of input power or gain reduction and not by an attenuator at
the output of the device.