background image

zBOOST

®

 SOHO YX560P USER GUIDE

10

zBOOST

®

 SOHO YX560P USER GUIDE

11

Solid GREEN

Normal condition at power up.

Slowly Alternating RED and GREEN

zBoost is working, but at reduced 

performance and coverage due to 

“non-ideal” setup. 

Solution: Increase the distance 

between antenna and amplifier to 

achieve maximum performance and 

coverage.

Fast Flashing RED

Indicates insufficient distance between 

the antenna and the amplifier. The 

amplifier is operating at significantly 

reduced coverage.

Solution: Increase space between 

base unit and antenna.

Solid RED

System is receiving signals from either 

the mobile device or the base station 

transceiver which are too strong for 

proper operation.

Solutions: 

 

Move away from 

receiving antenna with your cell 

phone. 

 

Move antenna away from 

other devices.

Fast Alternating RED and GREEN 

followed by no light

The amplifier is disabled.

Solution: Unplug your system and 

re-power.

zBoost Base Unit Light Indicators

At Initial Power Up Only

Solid GREEN

Normal condition.

Solid RED

System is receiving signals from either 

the mobile device or the base station 

transceiver which are too strong for 

proper operation. 

Solution: Unplug your system. Re-

orient your Signal Antenna and/or 

Base Unit to reduce the excessive 

signal source. Plug your system 

back in. If still solid red, call customer 

support 1-800-871-1612.

After Initial Power Up

Technical Specifications

Product Specifications for zBoost SOHO YX560P

PCS Band

Frequency

Uplink: 1850 - 1910 MHz  

Downlink: 1930 to 1990 MHz

System Gain

65dB

Max Rx / Distribution Power

13 dBm

Networks

CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, 

UMTS, HSPA, 3G

CEL Band

Frequency

Uplink: 824 to 849 MHz  

Downlink: 869 to 894 MHz

System Gain

65dB

Max Rx / Distribution Power

13 dBm

Networks

CDMA, GSM, GPRS, EDGE, EVDO, 1xRTT, 

UMTS, HSPA, 3G

General

Power Consumption – Power Supply Current

3W standby; 7W max signal - 2.0A Max

System Certifications

FCC Parts 15 & 22, Industry Canada

Base Unit Size and Weight

5” x 7” x 1.25” – 9 oz.

Wall Supply Input ; Voltage

100-240VAC, 50-60 Hz; 5.0VDC

Operating Conditions 

Indoor Use Only (40° - 105° F)

Coverage (open areas)

Up to 3500 square feet

This product uses patented technology to protect the carrier network

This product is covered by patent US 7,706,744.  Other U.S. and 

foreign patents pending.

Содержание SOHO YX560P












Отзывы: