LID
CERAMIC FILTER
UPPER TANK
SILICONE WASHER
FILTER NUT
MULTI-STAGE FILTER CARTRIDGE
O-RING
Place tap through hole in lower tank
with a silicon washer on each side.
Screw magnetic back onto tap inside
the bottom tank and tighten.
Place the lower tank onto stand.
Put pre-soaked Silver Stones and
Mineral Stones into lower tank.
*If you have Alkalinity & Anti-Oxidant
Enhancer (AAE) balls sprinkle amongst
the stones away from the back of the
magnetic tap so they can’t get sucked
into the back of the tap.
Place the middle ring onto the lower
tank rim.
Screw the Multi-Stage Filter Cartridge
into cartridge connector and sit in
middle ring (filter will hang in
lower tank).
Insert Ceramic Filter into the upper
tank and place silicone washer* on
filter stem underneath the tank. Fasten
on with filter nut* and tighten.
Place the top tank onto the assembled
lower tank.
Fill top tank with 4 litres of tap water
and pop on the lid.
Note: It will take 1½ to 2 hours to filter the 4 litre upper tank into the lower
tank. Do this twice to fill your system. Once the lower tank is full, you cannot
add more water to the upper tank or the system will overflow.
*Washer & nut come with Ceramic filter
Assembling your zazen Alkaline Water system
with the BPA Free Plastic Bottom Tank
zazen Alkaline Water | 1300 78 24 25 | zazen.com.au
3
1
2
3
4
5
6
7
8
Installation & Care Guide
CARTRIDGE CONNECTOR
A - TAP
B - SILICONE WASHERS
C - MAGNETIC BACK
STAND
MIDDLE RING
SILVER & MINERAL STONES
LOWER TANK
