manualshive.com logo in svg

Zaxcom ZFR400, Руководство пользователя

Поделиться
Скачать
Zaxcom ZFR400 Скачать руководство пользователя страница 8

Zaxcom ZFR400                                                                                                                   Menu Navigation

 

8 

Sub Menus 

 

Menu groups 

The ZFR400 has five sub menu groups 

 

Time Code

 - Changes the time code parameters of ZFR400.   

 

Record

 - Changes the parameters of the on-board recorder.   

 

ZaxNet

 - Changes the parameters of the ZaxNet transceiver. 

 

Audio

 - Changes the parameters of the transmitted and recorded audio.  

 

Setup

 - Changes the parameters of the general operation on the ZFR400. 

 

Accessing and navigating the menu groups 

From in the home screen press the CARD key three times, or hold the MENU key while booting up, to access the 
sub menu groups. Then pressing the INC or DEC key will cycle between the menu items. 

 

Entering and navigating a sub menu 

When landing on the desired menu group, press the MENU key to enter that menu. 
To return to the top of the menu press the MENU key to cycle to the top or press and hold the MENU key for 1.5 
seconds. 

 

Exiting the extended menu 

Press the CARD key 3 times, or press the MENU key to cycle through the sub menu items until HOME MENU 
is displayed then press the MENU key.

Содержание ZFR400






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды