Chapter 2____________________________________Zaxcom Miniature Digital Recorder User’s Manual
26
NOTE:
The Recreate Function is available in 5.92 and later. The Wrapper Files are everything on the card
except the DELETE.ME file, which consists of the folder and the files in the folder,
IMPORTANT:
This function will not work if you record audio and then delete the files. It only works if you
initialize the card, then delete the wrapper files and then record audio on it.
Timecode Jam Mode page
TC JAM MODE:
MANUAL (OFF)
Page purpose:
This page maintains how received timecode will be used.
Parameters:
AUTO-LOAD
– start and stop the recorder, based on the
o
If an IFB100 is being used - when the IFB100 timecode starts and stops.
o
If an STAxxx/TCA100 is being used and the timecode source is connected to it when the timecode
source starts and stops.
AUTO-JAM
– continuously jams timecode, based on the
Timecode Source page
selection.
MANUAL (OFF)
– jam timecode once, based on the
Timecode Source page selection
.
Timecode Source page
TC SOURCE:
IFB (RF)
Page purpose:
This page maintains which input to use as the timecode source.
Parameters:
SIDE CONNECTOR
– Accept a timecode source connected to the attached STAxxx‟s side connector.
IFB (RF)
– Accept a timecode source connected to the IFB100.
AUDIO INPUT
– Accept a timecode source connected to the Audio Input connector.
Timecode Output Enable page
TIMECODE OUTPUT:
OFF
Page purpose:
This page enables/disables timecode output and specifies the output connector.
Parameters:
ON: OUTRIGHT
– Sends timecode to the attached STAxxx‟s timecode output connection.
ON: OUTLEFT
– Sends timecode to the headphone output.
OFF
– Timecode is not output.
Remote Control Group ID page
REMOTE CONTROL
GROUP ID=1
Page purpose:
This page identifies which IFB100 can remotely control this recorder.
Parameters:
(
value range:
0
to
99
, step:
1
)
It is highly desirable to have all transmitters and recorders in a given group assigned to the same IFB100.