Zaxcom TRXLT3 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 35

background image

Zaxcom TRXLT3 ZaxNet Menu

14

ZAXNET MENU

ZaxNet Mode

This menu sets the mode of the ZaxNet transceiver.



OFF

- The ZaxNet transceiver is disabled. The TRXLT3 will not receive ZaxNet commands or time code and it

will not send any ZaxNet audio. Please note if ZaxNet mode is set to OFF the several ZaxNet menu items will
not appear.



RX

- The ZaxNet transceiver will receive ZaxNet commands and time code.

This screen will display what ZaxNet data is being received by the TRXLT3. Including total received
information packets, ZaxNet TC received and remote control commands received. This information is used
for debugging purposes.



TX

- The ZaxNet transceiver will send ZaxNet confidence audio and time code. Please note that in ZHD48

mode the TRXLT3 will not be able to go into transmit mode.

ZaxNet Receive Frequency Set

This menu will only appear if the TRXLT3 is set to receive (RX) mode

The ZaxNet receive frequency is the frequency that the TRXLT3 will get its wireless time code and remote
control commands on. This frequency will need to match the frequency of the corresponding ZaxNet
transmitter. The ZaxNet transmitter can be a QRX with QIFB, Nomad, TRX900CL or IFB100/200. The TRXLT3 can
also receive ZaxNet time code from another TRX transmitter or a ZFR recorder that is transmitting ZaxNet on
this frequency. Please keep in mind that the range will be limited when receiving ZaxNet from a TRX or ZFR.
When the TRXLT3 is receiving a valid ZaxNet signal the signal strength will be shown as well as signal strength
meter that runs vertically on the far right side of the screen.

ZaxNet Transmit Frequency Set

This menu will only appear if the TRXLT3 is set to transmit (TX) mode

The ZaxNet transmit frequency is the frequency that the ZaxNet transmitter on the TRXLT3 will broadcast time
code and confidence audio on. Please note the ZaxNet transmitted audio is for quality control purposes and the
expected range will be less than 20 feet.

ZAXNET MODE: TX

RX FREQ : 2.403 RX
SIGNAL : 28

ZAXNET TX FREQ:
2.473

«
...
12
13
14
15
16
...
»

Содержание TRXLT3




































Отзывы:

Нет отзывов

Похожие инструкции для TRXLT3

Бренд: Varec Страницы: 38

Бренд: Camsat Страницы: 2

Бренд: Camsat Страницы: 2

Бренд: Guangzhou Chuanzhou Electronic Technology Страницы: 12

Бренд: Realistic Страницы: 14

Бренд: V2 Страницы: 76

Бренд: ENFORCER Страницы: 8

Бренд: E+E Elektronik Страницы: 4

Бренд: Vaisala Страницы: 89

Бренд: POLMAR Страницы: 32

Бренд: SSI Страницы: 2

Бренд: Icom Страницы: 78

Бренд: Icom Страницы: 124

VHF MARINE TRANSCEIVER IC-M501EURO

Бренд: Icom Страницы: 34

Бренд: Midland Страницы: 32

Бренд: Honeywell Страницы: 48

Бренд: Honeywell Страницы: 2

Бренд: Honeywell Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды