Zaxcom RX-4, Руководство пользователя

Страница: 9 / 18

Zaxcom RX-4 Extended Menu
9
Output Router
The routing menu is where the TA5 connectors are assigned an output.
After changing modes it is necessary to reboot the RX-4.
Please note this menu is only in the A receiver but will control both the A and B receiver.
•
Mode 0 AES MONO-MONO –
Each receiver side (
A, B
) will receive signal from two mono transmitters. AES
audio will be outputted for each side on pins 2 and 3.
•
Mode 1 AES STEREO-MONO – The ( A ) receiver side will receive signal from 1 stereo transmitter and the B
receiver side will receive signal from two mono transmitters.
AES audio will be outputted on each side on pins 2 and 3.
•
Mode 2 AES STEREO-STEREO – Each receiver side ( A, B ) will receive signal from one stereo transmitter.
AES audio will be outputted on each side on pins 2 and 3.
•
Mode 3 ANALOG MONO-MONO
– Each receiver side (
A, B
) will receive signal from two mono transmitters.
Analog audio will be outputted on each side on pins 2 and 3, 4 and 5.
•
Mode 4 ANALOG STEREO-STEREO – Each receiver side ( A, B ) will receive signal from one stereo transmitter.
Analog audio will be outputted for each side on pins 2 and 3, 4 and 5.
•
Mode 5 ANALOG STEREO-MONO – The ( A )receiver side will receive 1 stereo transmitter and the ( B ) receiver
side will receive two mono transmitters.
Analog audio will be outputted on each side on pins 2 and 3, 4 and 5.
•
Mode 6 AES, ANALOG –
Each receiver (
A, B
) side will receive signal from a single mono transmitter. The
audio will be outputted as both a digital and an analog signal simultaneously.
AES audio will be outputted on pins 2 and 3 and the analog signal will be on pins 4 and 5 with pin 1 being
ground.
ROUTER MODE: 0
AES MONO-MONO