Zaxcom QRX235, Руководство пользователя

Страница: 15 / 39

Zaxcom QRX235 Extended Menu
15
Blue LED Set
This menu sets the action of the bottom LED in each group (total of 4 groups).
The side mount LEDs were designed to give visual confirmation that audio is being received at the QRX. This
menu gives the option to display that a valid RF signal is getting to the QRX even if no audio is being sent.
•
OFF - The bottom LED will only display the audio modulation and the blue LED is disabled.
•
BLUE FULL TIME
- Turns the bottom LED blue for each channel that is receiving a valid RF signal. When the
audio has gotten to the point of displaying a level for that channel, the bottom LED will continue to show blue
but with a tint of the appropriate modulation color of that channel’s LEDs.
•
BLUE PART TIME - Turns the bottom LED blue for each channel that is receiving a valid RF signal. Once the
audio is received, the blue is replaced with the appropriate modulation color for that channel.
Encryption Code Set
The encryption menu is where the encryption is turned on and the code is set. The encryption code needs to
match the encryption code of the associated transmitters. If an encryption code is set on the transmitter the
transmitted audio will be encrypted and can only be listened to if the QRX has the same matching encryption
code entered. When the codes do not match, all that will be heard is white-noise.
These two sets of numbers are formed into a single six-digit encryption code which provides a total of
16,777,216 possible combinations. For non-encrypted operations all six numbers should be set to 0.
Adjusting the encryption code
1.
Press the A/B key to advance to the next character.
2.
To change the designated character, press the INC or DEC key.
3.
To exit this page, press and hold the MENU key.
.
LED METER MODE:
OFF
ID1: 000 ID0: 000