Zaxcom QRX212, Руководство пользователя

Страница: 17 / 22

Zaxcom RX12 Firmware Update
17
Updating the RX12 Firmware
Each RX12 is shipped with the latest firmware version installed. When newer firmware becomes available, it can be
downloaded from the Zaxcom website:
http://www.zaxcom.com/software-updates
Newer version of beta software may be found on the Zaxcom Forums: http://www.zaxcom.com/forum
Updating the Firmware
1. Format a micro SD card using a PC or Mac.
2. Using a PC or Mac download the new software (RX12Profile_vX.XX.bin) and copy it to the card. Make sure
only one .BIN file is on the card.
3. Remove the cover of the RX12 noting the position of the longer and shorter screws.
4. With RX12 powered down, insert the micro SD card, which contains the .bin file, into the card slot inside
the RX12. To insert the card use tweezers to hold the card and insert the left corner of the card first, as
seen in the image below then slide the card fully into the slot
5. Press and hold the STAR key while powering on the RX12. If the RX12 goes blank shortly after powering up,
cycle the power again while holding the star key.
6. Once "PREPARING TO BURN ROM” is displayed, the STAR key can be released.
7. After “POWER DOWN NOW” is displayed, cycle the power.
8. Verify that RX12 is running the version just installed in the about RX12 menu.